| Basic
alloys : |
3005 / 3105 / 3003 /
5052 / 5005 / 5754 series (chemical composition
A.A. standard) |
|
Thickness : |
between 0.250 and
3.00 mm |
| Width : |
between 800 and 1,500
mm |
| Length : |
coils or sheets up to
7,000 mm |
| Coating : |
polyamide,
polyurethane, polyester, PVDF paints |
| Finishes* : |
glossy - semi glossy
- matt - metallic (both sides on
request) |
| Colours : |
unlimited range (RAL
colours and colours matched to sample
provided) |
| Protective film : |
LDPE protection
provided by UV-resistant |
| Weather
resistance : |
maximum |
| Fire
resistance : |
low flame spread
(RWTUV certification, class A1) |
| Workability : |
flexible paints
resistant to bending and deformation, no
cracking at a minimum of 1T |
| Impact
resistance : |
no cracking at a
maximum of 10 Nm |
| Machining : |
Rear milling: sharp
edges \ Without rear milling: rounded
edges |
| Off-cuts
recycling : |
100%
recycle |
| Appearance : |
completely evenness
of finish and colour |
| *Finishes : |
 |
polyester
paint: DWALL BASIC |
|
polyurethane paint: DWALL
KING |
|
polyamide paint: DWALL
QUEEN |
|
PVDF paint: 0-2 DWALL
PVDF (from 0.25 to 1.78 mm) |
|
PVDF
paint: DMAX (from 2 to 3
mm) |
|
